Vertical Metal Crusher
Vertical shredders (scrap shredders, metal shredders, steel scrap shredders) are mainly used in the field of scrap metal recycling. The original rotary crusher head uses high-quality wear-resistant materials, low loss, stable operation, safety and environmental protection, high efficiency and energy saving.
APPLICATION: It is mainly used for scrapping automobile body, light and thin scrap steel and electronic waste.
Description
The vertical metal crusher mainly uses the upper hammer structure to break materials by rotating at high speed. In the process of material automatic falling, the material is finely crushed and rolled by the gap between the lower hob and the crushing cavity. Meet the discharge requirements. Vertical crusher is characterized by its structure, high crushing speed, high efficiency and easy maintenance.
Working Principle
The material enters from the feeding hopper and falls into the shredding cavity. It is hit by the high-speed rotating hammer and counter-attacked and rubbed. The material is gradually shredded from large to small. Smaller materials fall into the lower shredding cavity and are beat again by a high-speed rotating compact hammerhead blow. Four shredding chambers repeat the shredding process. Due to the chamber space is small, shear stress is applied to part of the material between the hammer head and the tooth edge of the counterattack plate, milling is carried out, and the fine crushing of the material is accelerated. At the same time, the hammer head carries the material to flow, which produces a great grinding effect between each other, so that the material is further finely shredded until it is shredded to the required particle size.
Applicable materials:
The main application materials are: scrap metal, aluminum profile, motor stator, rotor and other waste mixed metal materials.
- ELVs (End of Life Vehicles) – Pre-shredded vehicle bodies
- Refrigerator/Fridge Recycling – Pre-shredded
- Scrap Steel – Pre-shredded steel sheets, metal drums, etc.
- Electronic Scrap – WEEE Directive Materials, meatballs.
- C&D Waste – Concrete, Timber, Plastics, etc.
- Paper Industry Waste – Ragger tails
- Timber Waste – Pallet wood, etc.
Specifications
|
PCL100 |
PCL200 |
PCL400 |
Dimensions L/W/H (mm) |
3020×3290×4570 |
4040×3470×5300 |
4580×3200×6300 |
Crushing chamber height (mm) |
675 |
835 |
950 |
Blade rotation diameter (mm) |
φ1130 |
φ1250 |
φ1400 |
Host power (kw) |
75 |
132 |
320 |
Equipment weight (kg) |
8000 |
13000 |
18000 |
Features
1.Ultra-high strength welded box.
2.CNC integrally processed vertical split box body to facilitate equipment maintenance.
3.High toughness and wear-resistant steel casting hammer head, hob and box liner, replaceable and long service life.
4.High service factor bearings reduce the chance of bearing damage due to improper use.
5.Discharge size is adjustable.
6.Standard hydraulic coupling protects transmission components.
7.Independent control electrical box.
8.The whole system complies with CE safety standards.
Project case
